HP Envy 4502 Setup Windows 10

How to Do HP Envy 4502 Setup on Windows 10?


HP 4502 model printer supports Windows 10. If you have a Windows 10 PC or laptop then, you can install the HP printer drivers from 123.hp.com/envy4502. Contact our tech experts to know how to do HP Envy 4502 setup Windows 10.

Follow the simple steps given below to download and install the HP 4502 model Windows 10 driver from 123.hp.com.

HP Envy 4502 Setup Steps:

  • Go to 123.hp.com and type your printer mode
  • Select your printer model from the list of printers and click Begin.
  • Click on the Download button to download the Envy 4502 model printer Windows 10 driver.
  • The driver file is saved on your computer. Click Download when prompted.
  • Double click the downloaded setup file and follow the on-screen instructions to complete the driver installation process for the HP Envy 4502 setup Windows 10 process.

Windows 10 update, automatically download the basic drivers for your HP printer by searching it either in the Microsoft website or HP website. This update will only provide basic functionalities, like print and scan options. To use the full functions like fax, copy, full featured HP printer driver is needed. Get instant support for HP Envy 4502 setup Windows 10 from us.

HP Envy 4502 Setup Windows 10

HP Envy 4502 Wireless Setup

Envy 4502 supports Wi-Fi Protected Setup (WPS) and PIN methods of wireless setup.

The initial HP Envy 4502 setup Windows 10 can be done, using the instructions on the printer manual.

Steps:

  • If you have a wireless router which supports WPS mode, then you can follow the WPS mode of wireless setup.
  • If your wireless router doesn’t support WPS, then you can go to the Wireless setting menu method, of the wireless setup instead.

HP Envy 4502 Wi-Fi Protected Setup (WPS):

  • Press and hold the Wireless Button on the printer for the HP Envy 4502 wireless setup process.
  • After the above step, the wireless light in the printer starts blinking. Know how to do HP Envy 4502 setup Windows 10 by just contacting us.
  • Press WPS (Wi-Fi Protected Setup) on your wireless router.
  • After the above step, the wireless setup will initialize and it will take 2-3 minutes to complete.

PIN or Wireless Setting Menu method:

  • Press the Wireless Button on the printer’s control panel.
  • Go to Settings and then select Wireless Setup Wizard.
  • Follow the on-screen instructions to complete the wireless connection.
  • Enter your details, such as network username and password during the setup process.
  • Insert your printer drivers CD-ROM, to install HP Envy 4502 printer driver software. Get instant assistance for HP Envy 4502 setup Windows 10, from our techies.
  • Follow the on-screen instructions to complete the HP 4502 wireless setup.

How to Print from Windows 10 to 123.hp.com/setup 4502 Printer?

You can directly print documents or images from your Windows 10 Mobile device, to your HP 4502 printer.

  • Make sure that the HP 4502 printer and your Windows 10 Mobile device are connected to the same wired (Ethernet) or wireless network.
  • Go to Wi-Fi settings on your Windows 10 Mobile device, and connect it to your wired or wireless network.
  • Open the document or an app like email, which has the file you want to print. Get easy tips for HP Envy 4502 setup Windows 10 process, from our technical experts.
  • Click on the Print icon .
  • After the above step, a print preview screen appears in which you can select your 123.hp.com/envy4502 printer and change any print settings, if necessary.
  • Once the necessary changes are made, click Print.
  • It also gives you options like number of copies, color of the print, paper size, paper range and orientation.

If the print job doesn’t get printed then, it could be due to the following issues;

  • Poor or no network available. Know more about HP Envy 4502 setup Windows 10 process by just contacting our techies.
  • Power saving mode is ON.
  • Printer is OFF.

To cancel a print job:

To cancel or check the status of a print job, follow the steps below,

  • Go to print queue on your Windows 10 mobile by tapping the Print icon.
  • Swipe down the display, the current print jobs are displayed.
  • Select the print job that you want to cancel, and then tap Cancel to cancel the 123.hp.com/envy4502 print job.
  • For instant support on HP Envy 4502 setup Windows 10, Just contact us.

Easy HP Envy 4502 Tips For the Best Print Success


  • Use the original HP 4502 ink cartridges
  • Make sure the cartridges have sufficient ink. The estimated ink levels can be seen from the Home screen by selecting INK
  • Always load a stack of paper, not just the one page. Use clean and flat paper of the same size. Only one type of paper must be loaded at a time.
  • Correct the paper-width guides, in the paper tray to fit properly against the stack of paper, such that they do not bend or crush the paper in the tray.
  • Set the print quality and paper size settings according to the type and size of paper loaded in the tray. More on HP ink cartridges, paper and HP setup and HP support at 123.hp.com/envy4502.
  • To know more about HP Envy 4502 setup Windows 10 process, Just reach our techies.
  • On the Print dialog, from the Paper Size pop-up menu select the size of paper loaded in the HP printer.
  • On the Print dialog, from the Paper Type/Quality pop-up menu and select the required paper type and quality.On the Print dialog, from the Paper Type/Quality pop-up menu and select the required paper type and quality.
  • To print a black and white document with only black ink, select the Paper Type/Quality, click Color Options, and select Grayscale from the Color pop-up menu. Contact our experts to know more about HP Envy 4502 setup Windows 10 process.
  • On the Paper/Quality tab, select the required paper type from the Media drop-down list of Tray Selection.
  • Select the required print quality in the Quality Settings area.
  • Select the paper size from the Paper Size drop-down list in the Advanced Options.
  • Access the Advanced Options box by the Advanced icon on the Layout or Paper/ Quality tab.
  • To change default print settings, select Print & Scan , and then select Set Preferences in the HP Envy 4502 software.
  • Windows 8.1: Click the down arrow in the left corner in the lower part of the Start screen, and then select the HP printer name. For more queries related to HP Envy 4502 setup Windows 10, just reach us.
  • Windows 8: On the Start screen, right-click an empty area on the screen, select All Apps on the app bar, and then click the icon with the HP printer’s name, HP Envy 4502.
  • Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs->HP->HP PRINTER (HP Envy 4502)
  • To print a black and white document using black ink only, click the Advanced button. From Print in Grayscale menu, Black Ink Only is to be selected and OK clicked. 123.hp.com/envy4502.
  • To cancel a print job:

  • To cancel or check the status of a print job, follow the steps below,
  • Go to print queue on your Windows 10 mobile by tapping the Print icon.
  • Swipe down the display, the current print jobs are displayed.
  • Select the print job that you want to cancel, and then tap Cancel on the 123.hp.com/envy4502 printer.
  • For quick guidance on HP Envy 4502 setup Windows 10, reach us.

Popular Envy Printer Models

Quick Tech Support
Click to go to top